User Manual
After successfully writing value to the device, the device name and version are
displayed on the UI.
A user now has the possibility to:
-
Stop the configuration
-
Configure another device
Pressing the 'Home' button stops the configuration and the application will return to
its start page.
Removing the programmed device from the reader will bring the application in the
state to program the next device, the text 'Waiting for device...' is visible and when
the next device is placed on the reader it will be configured with the same current
value. Aborting this sequence is again possible by pressing the 'Home' button.
Copyright © 2018 Philips Lighting Holding B.V.. All Rights Reserved
Fig 3: Successfully configured a device
Philips MultiOne Basic
Page 13 / 20