Ebyte NB144S User Manual page 15

Chengdu Ebyte Electronic Technology Co., Ltd.
LINK 1
DATA1
LINK2
DATA2
LINK3
DATA3
LINK4
DATA4
[Note] The status of some special working mode indicator lights:
1.Restore the factory, NET is always on for 5s, and the rest of the indicators remain in the state until NET goes
out and then goes out;
2.Wait for the firmware burning, and the other indicators except the power indicator will flash at a period of 50
ms until the upgrade file starts to be transferred, or the firmware burning wait is exited;
3.During the firmware burning operation, all the indicators except the power indicator will flash at a cycle of
500 ms until the upgrade is completed;
Copyright ©2012，Chengdu Ebyte Electronic Technology Co., Ltd.
No link connection: the indicator light is off;
Channel 1 Status The link connection is successful: the indicator light is
Indicator always on;
UDP mode: the indicator light is always on;
Channel 1 data Data sending and receiving: flashes when the network or
indicator serial port sends and receives data;
No link connection: the indicator light is off;
Channel 2 status The link connection is successful: the indicator light is
indicator always on;
UDP mode: the indicator light is always on;
Channel 2 status Data sending and receiving: flashes when the network or
indicator serial port sends and receives data;
No link connection: the indicator light is off;
Channel 3 Status The link connection is successful: the indicator light is
Indicator always on;
UDP mode: the indicator light is always on;
Channel 3 Status Data sending and receiving: flashes when the network or
Indicator serial port sends and receives data;
No link connection: the indicator light is off;
Channel 4 status The link connection is successful: the indicator light is
indicator always on;
UDP mode: the indicator light is always on;
Channel 4 status Data sending and receiving: flashes when the network or
indicator serial port sends and receives data;
NB144S User Manual
14