Playback; Basic Playback - JVC SP-PWM45 Instructions Manual

Dvd digital theater system
Hide thumbs Also See for SP-PWM45:
Table of Contents

Advertisement

Playback

This section explains basic operations of DVD player.
For more details about DVD player operations, see pages 33 to 45.
shows the types of discs the operation is
available for.
• Turn on your TV and select the correct input mode on the TV.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
Remote control
mode selector
23

Basic playback

% To load a disc
Up to 5 discs can be
loaded.
1
Press  for a desired disc tray on the
center unit to open the disc tray.
The system turns on and the disc tray comes out.
2
Place a disc on the disc tray.
With the label side up
When placing an 8 cm (3 inches) disc
(play button)
% To start playback
3
Press the selected DISC (1-5) button.
The system starts playback after closing the disc tray.
You can use the same buttons on the center unit for operations
unless otherwise noted.
When loading an MP3 disc
The MP3 control display (A pg. 36) appears on the TV screen and
playback starts from the first track in the first group after pressing
the DISC button in step 3. When all tracks in a group have been
played, the system starts playback of tracks in the next group.
When loading a JPEG disc
The slide-show* playback starts from the first file in the first group
after pressing the DISC button in step 3. When stopping playback
of a JPEG disc, the JPEG control display (A pg. 37) appears on the
TV screen.
* Slide-show
Each file (still picture) is shown on the TV screen for about 3
seconds, then changed to the next file one after another
automatically. When all files in a group have been played, the
system starts playback of files in the next group.
% To pause playback
Press &.
To return to normal playback, press ! (play button).
% To stop playback
Press %.
To change the playback disc while playing back the
another disc
Press the desired DISC (1-5) button.
• If no disc is set in the specified tray, the system starts playback of
the disc in the next tray automatically.
To remove a disc
Press  for a desired disc tray on the center unit.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents