GE 82007LC Assembly Manual

5 F T N E O N G R E E N R O P E L I G H T T R E E
A s s e m b l y M a n u a l - 6 9 8 0 8 3
Model No.:82007LC
Electrical Rating: Input : 120V AC, 0.536A ; Output : 24V DC, 37W,
Size: 5 feet
Operating Temperature: -5℉ to 95℉ (-20℃ to 35℃)
Application: Indoor and Outdoor Use
1. Assembly Instructions
Parts Included:
(a) Light Fixture
(b) Instruction and Assembly Manuals
(c) Accessories（1 bracket, 2 C Clips, 5 Zip ties and 4 stakes）
2. To Assemble：
a) Unfold the Christmas tree (Figure 1) and fix three C clips attached to metal frame to support the upper part of the
tree.
b) Unfold the two frame layer of the tree (Figure 2), set up as cross and tighten screw at the bottom to secure frames in
place.
c) With the center pin pointing up, install the support bracket C underneath brace A perpendicular to it as shown below.
Make Sure both ends of bracket C are resting on top of the outer frame locking area. (Fig. 2& 3)
d) Make sure the location is suitable to install the ground stake when using this item outdoor. Secure sculpture with 4
ground stakes provided (Figure 3)
e) Plug the tree into a GFCI-protected outlet to turn the tree lights on.
Figure 2 Figure 3
Figure 1
PRINTED IN CHINA MADE IN CHINA
©2017 Nicolas Holiday Inc., 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560. All rights reserved.