GE SB 48-IN NEON FLEX LED DEER Assembly Instructions

Available languages

Download this manual

GE SB 48-IN NEON FLEX LED DEER

Step 1

Step 4

82303

Step 2

Step 5

Step 1:

Insert part B into C according to the figure, and tighten the

screw to lock. Connect the male and female power cables

Step 2:

Insert B into part E according to the figure, and tighten the

screw to lock. Insert the hook into the hole.

Step 3:

Insert part A into B according to the figure, and tighten the

screw to lock. Connect the male and female power cables

Step 4:

Insert part D into B according to the figure, and tighten the

screw to lock. Connect the male and female power cables

Step 5:

Fix the four stakes at E and C according to the figure.

Step 3

Made In China

Need help?

Do you have a question about the SB 48-IN NEON FLEX LED DEER and is the answer not in the manual?

Page 1 GE SB 48-IN NEON FLEX LED DEER 82303 Step 1: Insert part B into C according to the figure, and tighten the screw to lock. Connect the male and female power cables Step 2: Insert B into part E according to the figure, and tighten the screw to lock.
Page 2 GE SB 48 "NEÓN CURVO CIERVO 82303 Piezas de ensamblaje Paso 1: Insertar la parte B en C de acuerdo con la figura, y apre. Tornillo a cerrar. Conecte los cables de alimentación macho y hembra. Paso 2: Insertar B en la parte E de acuerdo a la figura, y apre.

82303