Table of Contents
Advertisement
M a nua l Tra ck ing
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PRO G buttons.
O VERRIDE AUTO MATIC
TRACKIN G
Press
on the remote to engage manual tracking.
1
ADJUST TRACKIN G
MAN UALLY
Press TV PRO G + or – to adjust tracking.
2
RETURN TO AUTO MATIC
TRACKIN G
Press
on the remote to re-engage automatic
3
tracking.
N O TE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Insta nt ReV iew
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
N O TE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE IN ST AN T
REVIEW
Press REVIEW . The recorder power comes on and the
1
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
● The front display panel tells you how many programmes
have been timer-recorded. If you have, for example, 3
programmes, " REVIEW" and "3" appear and blink. To
watch the first of the 3 programmes, press REVIEW three
times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
N O TES:
● Instant ReView is not possible while the recorder is in the
Timer mode.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
(
pg. 28).
Downloaded from:
https://www.usersmanualguide.com/
Index Sea rch
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
N O TE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE IN DEX SEARCH
Press
or
( ™ or £ ). " ™ 1" or " £ 1" is
1
@
#
displayed on screen and search begins in the corre-
sponding direction.
● To access index codes 2 through 9, press
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
Current position
A
–2
● When the specified index code is located, playback
begins automatically.
Sk ip Sea rch
SKIP O VER UN WAN TED
SECTIO N S
Press 30 SEC 1 to 4 times during playback. Each press
1
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
N O TE:
To return to normal playback during a Skip Search, press PLAY .
N ex t Function M emory
The Next Function Memory "tells" the recorder what to do
after rewinding. Before continuing, make sure the recorder
is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW , then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW , then press
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW , then press
15
EN
£ 2
or
@
#
twice.
@
once.
#
B
C
D
E
F
–1
1
2
3
Index number
within 2 seconds.
( TIM ER ) within 2 seconds.
Advertisement
Table of Contents
