Advertisement
Connect the Basic IP Desk Phone to the handset
1
Take the long end of the handset cable
at the back of the phone
next, plug the short end of the cable into the
D
bottom of the handset
tuck the cable into the horizontal cable slot on
E
the back of the phone.
D
DC V5
Connect the Basic IP Desk Phone to the foot stand
2
Take the foot stand
and connect it into the back of the phone
F
Make sure the Cisco logo is facing outwards.
D
DC V5
and plug it into the handset jack
B
AUX
B
E
F
AUX
cisco
Connect the Basic IP Desk Phone to the internet
3
Take the network cable
of the phone
other end of the cable into a spare internet connected LAN port on your
modem or switch.
If your switch supports Power over Ethernet (PoE), the phone will begin
powering up – go to step 5.
D
Connect power to the Basic IP Desk Phone
4
.
If you have purchased the optional power cable
D
connect it to the power input port and plug the other end into a power
source.
and plug it into the network port at the back
C
tuck the cable into the horizontal cable slot. Then plug the
D
AUX
DC V5
C
DC V5
A
Modem/Switch
C
(optional)
for your phone
,
A
D
D
AUX
Advertisement
