Power And Sound Controls - International CR-W400U Operating Instructions Manual

Power and Sound Controls

d
d
Power
If the vehicle is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press [PWR] to switch on the power.
Volume
Press the knob to select the volume mode and then turn it
●
clockwise or counterclockwise to adjust the volume level.
CRW400U
0 to 40
Anti-Volume-Blast Circuit
At power on, the volume returns to the previous level slowly if
the level was at 20 or higher.
Changing Audio Modes
Press this knob [SEL] to change the audio mode as follows.
VOL
(Volume)
c
FADE
CRW400U
(Fader)
Bass and Treble
Press the knob to select the BASS or TREBLE mode and then turn
it clockwise or counterclockwise to increase or decrease the
bass/ treble level.
-12 to 12
CRW400U
CRW400U
Volume Level
CRW400U
a BASS a
b
CRW400U
TRE
(Treble)
d
BAL
(Balance)
-12 to 12
4