Specifications; Part 15 Of The Fcc Rules - International CR-W400U Operating Instructions Manual

Specifications

General
Power Supply
Maximum Power Output
Power Output
Tone Action
Current Consumption
Speaker Impedance
Dimensions (W
Weight
AM Radio
Frequency Range
Useable Sensitivity
FM Stereo Radio
Frequency Range
Useable Sensitivity
50 dB Quienting Sensitivity
Frequency Response
Alternate Channel Selectivity
Stereo Separation
Signal/Noise Ratio
Weather Band Radio
Frequency Range
Useable Sensitivity
Signal/Noise Ratio (40 dB/µV)
*Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in
technology.

Part 15 of the FCC Rules

This unit has been manufactured under the Part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.
17
: 12 V DC (11V-16V) Test Voltage 14.4V, Negative ground
: 37W
: 18W per channel into 4 ohms, 40 to 30,000Hz at 3% THD.
: Bass; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
: Less than 2.5 A (0.5W 4-speaker)
: 4 (4-8
H D) : 7"
: 1 lbs. 14 oz. (0.85 k g )
: 530-1,710 kHz
: 28 dB/µV (25 µV/ S/N 20 dB)
: 87.9-107.9 MHz
: 12 dBf. (1.1 µV / 75 , S/N 30 dB)
: 17 dBf. (1.8 µV / 75 )
: 30-15,000 Hz ± 3 dB
: 75 dB
: 35 dB at 1,000 Hz
: 70 dB (Mono)
: 162.40-162.55 MHz
: 3 dB/µV (S/N 20 dB)
: 50 dB
4 channels at 400 Hz, Volume Control maximum
acceptable)
1-15/16" 5-7/8" (178 50 150 mm)