Electrical Connections - International CR-W400U Operating Instructions Manual

Electrical Connections

Cautions:
This product is designed to operate with a 12-volt negative ground battery system.
●
To prevent damage to the unit, be sure to follow the connection diagram below.
●
Do not insert the power connector into the unit until the wiring is completed.
●
Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle
●
all cables and keep cable terminals free from touching any metal parts.
Antenna
(Rear Side)
(Gray w/black stripe)
(White
(white)
w/black
stripe)
Left Speaker Right Speaker
(Front)
Receiver
CR-W400U
Power Connector
ACC
Ground
Battery
Dimmer
(Green
(Gray)
w/black
stripe)
Left Speaker
(Front)
(Red)
(Black)
(Yellow)
(Orange w/White stripe)
(Violet w/black stripe)
(Green) (Violet)
Right Speaker
(Rear) (Rear)
Power Lead (ACC or IGN)
To ACC power, +12V DC
Ground Lead
To a clean, bare metallic part of
the vehicle chassis
Battery Lead
To the vehicle battery, continuous
+12V DC
Dimmer Control Lead
Connect to vehicle dimmer control lead
14