General Instructions - New Holland T3010 Operator's Manual

INTRODUCTION AND SAFETY MEASURES - - SECTION 1

GENERAL INSTRUCTIONS

1. During the manufacturing of this tractor, every
step has been taken to ensure safe operation.
However, the best way to avoid accidents is to
exercise caution at all times. Once the accident
has already happened it is too late to remember
what steps should have been taken.
2. Read this Manual carefully before starting, using,
carrying out maintenance,
performing any other type of operation on the
tractor.
3. The time spent reading this Manual will allow you
to get to know your tractor, thereby saving time and
effort. This will also help prevent accidents from
taking place.
4. Read all the safety decals on the machine and
follow the instructions thereon before starting,
operating, refuelling or carrying out maintenance
on the machine. Promptly replace any decals
that are damaged, lost or illegible.
Clean the decals if they are covered by mud or
debris.
5. Remember that the tractor is exclusively
designed for agricultural use. Any other use will
require prior authorisation
HOLLAND.
6. It is advisable to keep a first aid kit on hand.
FOR WORKING SAFELY
refuelling or
from NEW
7. The tractor must only be used by responsible
personnel, trained in tractor use and authorised
to operate the machine.
8. Do not alter the injection system calibration in an
attempt to increase maximum engine speed.
9. Do not wear loose clothing that may be trapped in
moving parts.
Wear the protective clothing required for the job
in hand.
10. Do not alter the calibration of the pressure relief
valves in the various
(hydrostatic steering, hydraulic lift, auxiliary
control valves, etc.).
24266
hydraulic circuits
1--11