Expansion Option Data; Knx - Symcon SymBox Manual

7.2

Expansion Option Data

7.2.1

KNX

The connector is a 2-pin systems connector from Phoenix corp. Setting the physical address may
be done directly with IP-Symcon (ver. 6.2 and above) on the KNX gateway, with which the KNX
extension may be put into programming mode.
The installed KNX interface is based on the Weinzierl KNS BAOS module and is henceforth
KNX certified.
+ - + -
LAN USB KNX 24V
31