Catnets Lite Double 2.3m Portable Cat Enclosure Manual

Lite Double 2.3m
Portable Cat Enclosure
Part List
20x Aluminium Poles
8x 3-Way Connectors
4x 4-Way Connectors
1x Enclosure Cat Netting
100x Cable Ties
6x Steel Pegs
1x Carabiner
Preperation
Check that you have all the required parts.
Make sure to install the enclosure on a
level ground surface.
Make sure to lock in all connectors securely.
Attatch the aluminium poles to the 3-way connectors creating the
1
corners of the frame. Use the 4-way connectors to connect the
middle of the frame.
3
Connect the remaining aluminium poles to complete the main frame.
Secure the net to the frame by using the included cable ties.
5
Ensure there are no gaps large enough for your cat to escape.
Connect 6 poles vertically into the connectors on the base. Then
2
attach the remaining connectors into the top of the poles the same
way as the step before.
Slip the net over the frame. Make sure to pull the net down to the base slowly
4
adjusting each corner as you go.
NOTE: Ensure the zipper is on the left of the long side of the enclosure,
facing you so that the net doesn't become twisted once attached.
For added security, use the supplied steel pegs to secure the
6
enclosure into the ground.