Advertisement
Cat Portable
Assembly Instructions
Redesigned from the inside out
This re-designed Cat Enclosure has the netting being pulled from the inside, out
towards the sturdy steel frame. This design ensures the net can be tensioned as
taught as possible, a feature that provides the safest environment for your cat.
This is a crucial safety feature that can't be replicated by simple "slip-over" net
designs.
Being a unique design, following the instructions will absolutely help you
to assemble the enclosure without hassle. Not following the instructions
step-by-step will cause undue time and possible damage to your new
enclosure.
Note: If possible, the enclosure is built much easier with the help of 1 assistant.
Contents:
Prior to construction please ensure you have received all the required components. Your 2 parcels should contain:
• Steel Frame (20pcs with pin lock and 20 without)
• 8 x 3-way Connectors AND 4 x 4-Way Connectors
• 1 x Enclosure Net
• 1 x Hammock and Shade Sail
• 1 Quick Release Carabiner
Required Tools: Scissors
Step 1: Connect Poles Together
Lay the poles on the floor and group them into their two types.
Type 1: Pinlock at BOTH ends
Type 2: Pinlock at 1 end and pinlock HOLE at the other end
Connect all Type 1 poles into a Type 2 pole. DO NOT connect them into connectors at this stage.
IMPORTANT: The Ends of each TYPE 1 Pole are slightly di erent. One end (Long end) is designed for inser-
tion into a type 2 Pole, whilst the other end (short end) is designed for insertion into a corner connector.
VERY IMPORTANT:
Please be sure to read carefully
and follow the instructions
purrr-fectly!
We highly recommend you
view our step-by-step Instruc-
tional Video on our website.
Simply scan the QR code:
- OR -
Head to our website:
www.catnets.com.au/cat-portable-instruction-vid
Advertisement
Table of Contents
Related Manuals for Catnets Cat Portable
Summary of Contents for Catnets Cat Portable
- Page 1 Cat Portable Assembly Instructions Redesigned from the inside out We highly recommend you view our step-by-step Instruc- tional Video on our website. Simply scan the QR code: This re-designed Cat Enclosure has the netting being pulled from the inside, out towards the sturdy steel frame.
- Page 2 Step 2: Prepare Netting Base Openings To ensure the frame assembly is quick and easy, a minor adjustment to the PVC base is required. Lay your net out in an open space, and identify the corner openings of the PVC base. Firstly move the large PVC Flap out of the way into the centre of the enclosure.
- Page 3 By use of this enclosure, you are acknowledging having read and accepted our conditions of trade, a copy of which can be viewed at: http://www.catnets.com.au/conditions.pdf IMPORTANT CAUTION: DO NOT OVER-CLOSE ZIP BUCKLES AT L-JUNCTION When approaching the corner where the 2 Zippers meet, each slider will stop approximately 2cm from the end of the chain.
- Page 4 Velcro tabs. Undo both tabs of the netting Velcro and retighten them on top of the hammock Velcro to lock the hammock Velcro into position. Visit our website: www.catnets.com.au Share your photos with the community at: www.facebook.com/Catnets...
Need help?
Do you have a question about the Cat Portable and is the answer not in the manual?
Questions and answers