Exposure OLAS CORE Setup And Range Test

Exposure OLAS CORE Setup And Range Test

Advertisement

Setup and Range Test
FOR FIRMWARE VERSION 2.0+
Note:
iPhone
Search
OLAS: Wireless
Marine Safety
Ultimate Sports Engineering
GET
5.0
4+
Age
What's New
Preview
1. Download the OLAS App from Google Play or the App
store.
Press for 4
seconds until
light green
Double press
3. Switch on 1 x OLAS Tag (or switch on OLAS within the
OLAS Float-On).
5. You should always try to install your Core at least 0.5
meters from any equipment transmitting radio signals
including VHF Radios, antennas and cables.
Do not test at home. The system has been designed to be tested on a vessel
Android
Exposure OLAS
- Overboard
Location Alert
System
Ultimate Sports Engineering Ltd
PEGI 3
i
Install
About this app
1m
2. Locate a 5V USB port near the centre of the vessel.
Note: Power banks will not power the Core.
4. Plug in the power to the Core.
6. If located within 0.5 meters it is possible false alarms
may occur. If you are experiencing false alarms try
moving the Core hub away from other electrical devices
and then carry out the Guardian setup and range test to
see if the false alarms still occur.
exposureolas.com
50ft
5V
USB
1m

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OLAS CORE and is the answer not in the manual?

Questions and answers

Summary of Contents for Exposure OLAS CORE

  • Page 1 Note: Do not test at home. The system has been designed to be tested on a vessel iPhone Android 50ft Search OLAS: Wireless Exposure OLAS Marine Safety Ultimate Sports Engineering - Overboard Location Alert System Ultimate Sports Engineering Ltd What’s New...
  • Page 2 Setup and Range Test FOR FIRMWARE VERSION 2.0+ 7. Hold the OLAS tag next to the Core. 8. The Core will double beep to acknowledge the tag is now being tracked. Device Selection Please choose which OLAS method you wish to set up OLAS Back Done...
  • Page 3 Setup and Range Test FOR FIRMWARE VERSION 2.0+ ID: 0438 0438 Near 0438 0438 13. Check that the tag displayed on the app screen has the same ID 14. Leave the Core in its location and either walk with your mobile number as the tag you are testing with.
  • Page 4 Setup and Range Test FOR FIRMWARE VERSION 2.0+ 0438 Near 0438 Near 0152 Near 0152 Near Your Core system is now setup. 0347 0347 Near It is advised to test the alarm regularly. Instruction on how to do this can be found in the 'Alarm Testing' guide. 0597 0597 Near...

Table of Contents