Download Print this page

NEC DTERM 2400 PBX User Manual page 2

Advertisement

SAVE & REPEAT (S&R)
Save a number, to be dialed later
1. Dial outside number, receive answer, busy or not
answer
2. Press S&R, light is on
To dial saved number
1. Lift handset
2. Press S&R
PICKUP
Answers any ringing ext. in your group
1. Hear ringing extension in group
2. Get dial tone, press PICKUP or *4
3. Caller is automatically on line
STATION SPEED DIAL
To store a number
1. Do Not Lift Handset
2. Press FEATURE button
3. Press desired Speed Call Button where number is
to be stored
4. Dial number to be stored (include 9)
5. Press FEATURE again, display shows SPD
SET
To use stored number
1. Lift handset or press speaker
2. Press Bin Button
FEATURE BUTTON
FEATURE + 1 = Turns MIC on and off
FEATURE + 2 = Adjusts handset receiver volume
FEATURE + 3 = Selects ringing tone (4 Choices)
FEATURE + 4 = Transmission/receiving volume
FEATURE + 5 = Activates Handsfree Operation
FEATURE + 6 = Deactivates Handsfree Operation
to pick up handset
UP/DOWN ARROW KEYS ▲▼
LCD Contrast – Press up or down arrow while
idle
Speaker/Receiver volume – Press up or down
arrow during conversation
Ringer Volume – Press up or down key during
ringing
DIRECTED CALL PICKUP
Answers a specific ringing ext. anywhere
1. Hear ringing extension number
2. Get dial tone, Dial #4 plus ringing ext.
3. Caller automatically on line
CALL PARK
Hold a call that can be picked up anywhere
To Park a Call
1. While call on the line, press TRF*2
2. Hear confirmation tone
To Retrieve at another extension
1. Get dial tone
2. Dial #2 plus the ext you set park
3. Caller is on line
To Retrieve at same set
1. Get dial tone
2. Dial **2
SOFT KEYS
Headset – Press to activate Headset Operation
Mic – To Activate or Deactivate Microphone
Help – Press Help and the Soft key for information
Exit – Press to exit Help Program
OHROFF & OHRON – Turns off and on Ringing
of other extension on set (while on the phone)
MUTE – Use to mute Handset, Headset or Speaker

Advertisement

loading