JVC KD-LH300 Instructions Manual page 31

• Opening : Opening screen
To download an animation to be shown
after the unit is turned on. (You can store
only one animation consisting of a
maximum of 30 frames.)
• Ending : Ending screen
To download an animation to be shown
before the unit is turned off. (You can store
only one animation consisting of a
maximum of 30 frames.)
• Picture : Graphic screen*
To download a still image to be shown if no
operation is done for about 20 seconds. (You
can store 90 frames of still images—one
frame each.)
• Movie : Graphic screen*
To download an animation to be shown if
no operation is done for about 20 seconds.
(You can store only one animation consisting
of a maximum of 90 frames.)
* Graphic screen will appear only if the
"Graphics" setting is set to one of the
following—"UserMovie," "UserSlide," or
"UserPict." (see page 38).
If you want to cancel the procedure,
press number button 5, the download
selection screen goes off.
6
Show the name list of the folder
included in the inserted CD-R.
"File Check...." appears for a
while, then the folder list
appears.
The currently selected folder will be
highlighted on the display.
Notes:
• On this list, the folders including the target
files—<jml> files for "Picture" and <jma>
files for the others—are shown.
• The display can show only six names at a time.
You can show the other names on the next lists
by pressing 5 (up) or ∞ (down).
• If a disc inserted does not include any <jml>
and <jma> files, beeps sound and you cannot
go to the next step.
If you want to cancel the procedure, press
D DISP.
7
Select (highlight) a folder in which a
file you want is included.
8
Show the name list of the files
included in the selected folder.
Folder name
list
Ex.: When you have selected "Picture" in
step 5
Note:
The display can show only six names at a time.
You can show the other names on the next lists
by pressing 5 (up) or ∞ (down).
CONTINUED ON THE NEXT PAGE
Each time you press the
button, the lists on the
display changes as
follows:
File name
list
31