Recall; Voice Callings - Aiphone AN-8000 Operating Instructions Manual

2.2.4. Recall

The last conversation partner can be recalled by pressing the [
made or received. Only the AN-8000MS Multifunctional Master Station and the AN-8500MS IP Multifunctional
Master Station permit selection from the most recent 10 numbers.
When using the AN-8010MS/8011MS/8020MS/8031MS:
Press the [ ] key to recall the last conversation
partner regardless of whether the call was made or
received.
When using the AN-8000MS/8500MS:
Step 1. Press the [
the conversation partners regardless of whether the
call was made or received on the display.
Step 2. Use the Up and Down arrow keys to display the
desired dial number. Pressing the Down arrow key
displays the last ten numbers dialed in reverse
chronological order.
Step 3. Press either the Select or [
dial operation indicated on the display.

2.2.5. Voice callings

A voice call can be made to the called station while
making a call by means of a continuous call tone.
• Voice a call to a called party by pressing the Push-to-
talk key as the continuous call tone sounds.
The call tone stops as long as the Push-to-talk key is
pressed, enabling the called party to hear your voice.
• The original continuous call tone resumes as soon as
the Push-to-talk key is released.
] key to display the recent dial data of
] key to perform the
Chapter 2: FUNCTIONS AND OPERATION
] key regardless of whether the call was
Call
(The last conversation partner)
[Example]
R e c a l l
9 : 1 0 0 8
R e c a l l
8 : 1 1 1 1
1 1 1 1 M a i n e n t r a n
C a l l i n g
Continuous call tone
Call
Hello, Mr. A.
Call
PTT
Continuous call tone
2-7