Chapter 3. Mechanical Description Removing And Reinstalling The Main Parts - Sharp XL-MP150H Service Manual

E Market XLMP150H Service Manual XL-MP150H/MP150E Audio
CHAPTER 3.
MECHANICAL DESCRIPTION
[1] REMOVING AND REINSTALLING THE
MAIN PARTS
1. TAPE MECHANISM SECTION
Perform steps 1 to 5, 11 of the disassembly method to remove the tape
mechanism.(see page 3-3,3-4)
1.1. How to remove the Record/Playback Head (See Fig. 1)
1. When you remove the screws (A1) x 2 pcs and (A2) x 1 pc., the
record/playback head can be removed.
1.2. How to remove the Pinch Roller (See Fig. 2)
1. Carefully bend the pinch roller pawl in the direction of the arrow
<A>, and remove the pinch roller (B1) x 1 pc., in the direction of the
arrow <B>.
NOTE: When installing the pinch roller, pay attention to the spring
mounting position.
1.3. How to remove the Belt (See Fig. 3)
1. Remove the main belt (C1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (C2) x 1 pc.
1.4. How to remove the Motor (See Fig. 4)
1. Remove the screws (D1) x 2 pcs., to remove the motor.
Erase Head
(A1)x2
Ø2x6mm
Pinch Roller
(B1)x1
Main Belt
(C1)x1
(D1)x2
2.6x5mm
Ø
3 – 1
XL-MP150H/MP150E
Clutch Ass'y
Record/Playback
Head
(A2)x1
Ø2x9mm
Figure 1
Pinch
Roller
<A> Pawl
Pull
<B>
Figure 2
FF/REW
Clutch
Motor
FF/REW
Belt
(C2)x1
Flywheel
Figure 3
Motor
Clutch Ass'y
Figure 4