Download Print this page

URBANGLIDE RIDE 65+ Original Manual page 21

Advertisement

Battery level
Power indicator
Light
ON/OFF
Press the display button for 2 seconds to turn it on.
Press again for 2 seconds to turn it off
Gear change
Press the ON/OFF button once
There are 3 speed levels:
1 bar → 6km/h
2 bars → 15km/h
3 bars → 25km/h
Light
2 Short presses on the button to turn on the front and rear light, the rear light is integral when
you press the brake.
Start-up mode
3 Press to activate or deactivate the start at 0km/h or 3km/h. (If the cone is displayed then the
starting aid is activated)
KPH/MKH
When the device is switched off, switch on the product and keep the button pressed for 5
seconds.
Cruise control
By default it will be deactivated, in order to activate it you must press the accelerator and the
brake at the same time until the ON/OFF button changes colour (Red deactivated/White
activated).
To put yourself in cruise control, accelerate at the same speed for 8 seconds.
To stop cruise control, pull the brake or accelerator trigger.
Use of the screen
Function of the ON/OFF button
Speed indicator
Start-up mode

Advertisement

loading