Assigning Basic Settings
Click Express Setup. The Express Setup screen appears.
Step 5
Figure 5-2
Enter the configuration settings you obtained from your system administrator. The configurable settings
Step 6
include:
System Name—The system name, while not an essential setting, helps identify the bridge on your
•
network. The system name appears in the titles of the management system pages.
Configuration Server Protocol—Click on the button that matches the network's method of IP
•
address assignment.
–
Note
–
Cisco Aironet 1300 Series Bridge Hardware Installation Guide
5-6
C I S C O C O N F I D E N T I A L - F i r s t D r a f t
Express Setup Page
DHCP—IP addresses are automatically assigned by your network's DHCP server.
When DHCP is enabled, the IP Address, Subnet Mask, and Default Gateway fields indicate
Negotiated by DHCP
Static IP—The bridge uses a static IP address that you enter in the IP address field.
Chapter 5
Configuring the Bridge for the First Time
Figure 5-2
shows the Express Setup page.
OL-5048-01