Setting The Operating Times; Changing The Pin - Parkside PMRA 20-Li A1 Instructions Manual

3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confi rm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select
"Rain mode".
7. Confi rm the selection with the OK but-
ton (7).
8. To deactivate the rain sensor, select "De-
activate" and confi rm the selection with
the OK button (7).
To activate the rain sensor, select "Acti-
vate" and confi rm the selection with the
OK button (7).
Select a time in minutes when
the lawn mower should start op-
erating again after the rain.
Decide also whether the lawn mower
should make up for the break in operating
time caused by the rain.
Confi rm each selection with the OK
button (7).
9. Return to the main menu with the back
button (5).
We advise against having the lawn
mower operate while it is raining.

Setting the operating times

1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confi rm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select "Op-
erating time".
7. Confi rm the selection with the OK but-
ton (7).
8. Select the desired operating time with
the arrow buttons.
You set the operating time in full
hours per day.
9 Confi rm the selection with the OK but-
ton (7).
10. Return to the main menu with the back
button (5).
When the set operating time per
day is reached, the lawn mower au-
tomatically returns to the charging station.

Changing the PIN

1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN (factory setting "1111").
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings".
5. Confi rm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select
"Change PIN".
7. Confi rm the selection with the OK but-
ton (7).
8. Enter the old 4-digit PIN. If you have
entered the PIN incorrectly, use the
back button (5) to return to the pin en-
try.
9. Now enter a new PIN.
10. Confi rm the new PIN by entering it
again. If you have entered the PIN
incorrectly, return to the PIN entry with
the back button (5) and repeat steps 8
and 9.
11. You can recognise a successful change
when "Successful!" appears on the dis-
play (10). Return to the main menu with
the back button (5).
GB MT
59