Watts PVI CEN2000 Installation Manual
  1. Manuals
  2. Brands
  3. Watts Manuals
  4. Water Heater
  5. CEN2000
  6. Installation manual

Watts PVI CEN2000 Installation Manual

Hide thumbs Also See for PVI CEN2000:
1
2
3
4
5
6

Advertisement

Table of Contents

•
•
•
Disclaimer
The information contained in this manual is subject to change without notice
from PVI Industries, LLC. PVI makes no warranty of any kind with respect to this
material, including, but not limited to, implied warranties of merchantability and
fitness for a particular application. PVI is not liable for errors appearing in this
manual, not for incidental or consequential damages occurring in connection
with the furnishing, performance, or use of these materials.
•
TAG-0104_A
4/18/2023
© 2023 PVI, a Watts Brand

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PVI CEN2000 and is the answer not in the manual?

Questions and answers

Related Manuals for Watts PVI CEN2000

Summary of Contents for Watts PVI CEN2000

  • Page 1 PVI is not liable for errors appearing in this manual, not for incidental or consequential damages occurring in connection with the furnishing, performance, or use of these materials. © 2023 PVI, a Watts Brand • TAG-0104_A...
  • Page 2 Centurion Pre-Installation Electrical Power Guide 1. GENERAL Centurion natural gas fueled modulating and condensing water heaters are fully factory wired packaged units which require simple external power wiring as part of the installation (Figure 2- 1). This technical guide is intended to help designers provide electrical power wiring (line voltage) to Centurion units.
  • Page 3 Centurion Pre-Installation Electrical Power Guide Service Disconnect Switch Figure 2-1: Service Disconnect Switch Typical Location POWER FUSE BLOCKS TERMINAL TRANSFORMER BREAKER BLOCKS 12V POWER 24 VDC POWER SUPPLY SUPPLY Figure 2-2: Electrical Power Panel Internal Components TAG-0104_A • • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST 4/18/2023 Page 3 of 6...
  • Page 4 Centurion Pre-Installation Electrical Power Guide 3. PROVISIONS FOR SERVICE Designers must provide emergency shutoffs and other devices to satisfy electrical codes. It is also recommended to provide an electrical shutoff disconnect switch of suitable load carrying characteristics on or near each Centurion water heater. •...
  • Page 5 Centurion Pre-Installation Electrical Power Guide For applicable wiring connections, refer to the schematic diagrams below. 208 V / 3 / 60 Hz Figure 4-2 – CEN2000: 208 V / 3 / 60 Hz - 5 Wire 460 V / 3 / 60 Hz ...
  • Page 6 Centurion Pre-Installation Electrical Power Guide Change Log Date Description Changed by 4/18/23 Initial Release DW Barron © Watts Heating and Hot Water Solutions, LLC, 2023 TAG-0104_A • • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST 4/18/2023 Page 6 of 6...

Table of Contents