Table of Contents
Advertisement
Option
Description
Network Settings Specifies options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
Integrated
Specifies options to manage integrated device controllers and ports, specifies related features and
Devices
options.
Serial
Specifies options to manage the serial ports, its related features and options.
Communication
System Profile
Specifies options to change the processor power management settings, memory frequency.
Settings
System Security
Specifies options to configure the system security settings, such as system password, setup password,
Trusted Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the
system.
Redundant OS
Sets the redundant OS info for redundant OS control.
Control
Miscellaneous
Specifies options to change the system date and time.
Settings
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and the BIOS
version.
View System Information
To view the System Information screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
Option
Description
System Model
Specifies the system model name.
Name
System BIOS
Specifies the BIOS version installed on the system.
Version
System
Specifies the current version of the Management Engine firmware.
Management
Engine Version
6
Pre-operating system management applications
Advertisement
Table of Contents
