Page 1
3515302 Protective clothing must be worn Please read all instructions carefully before use and retain for future reference. CAUTION Do not immerse in water. Protect your eyes. Wear a dust mask. Protect your ears. Protect your hands. PRODUCT DISPOSAL INFORMATION For electrical products sold within the European Community, at the end of the electrical product’s useful life, it should not be...
Page 2
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool/ machine in unexpected situations. Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
cutting tools with sharp cutting edges are less likely to bind and are easier to control. Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the Breaker.
Page 4
Wir erklären unter unserer alleinigen Verantwortung das Produkt: Declaramos bajo nuestra exclusiva responsabilidad el producto: Si dichiara sotto nostra eslusiva responsabilità che il prodotto: 3515302 Description / La description / Beschreibung / Descripción / Descrizione Compact Router Deluxe Routeur compact Deluxe...
Page 9
ASSEMBLY / ASSEMBLÉE / VERSAMMLUNG / MONTAJE / MONTAGGIO / EL MONTAJE Adjust the height in increments. Ajustez la hauteur par incréments. Passen Sie die Höhe in Schritten an. Ajustar la altura en incrementos. Regola l’altezza in incrementi. A5P | 01...
Page 12
ASSEMBLY / ASSEMBLÉE / VERSAMMLUNG / MONTAJE / MONTAGGIO / EL MONTAJE Min 70mm / 2.7” o Min 121mm / 4.7” o Max 121mm / 4.7” o Max 221mm / 8.7” o A5P | 01...
Page 15
ASSEMBLY / Install the Motor Unit into the Plunge Base, lower into Now the predetermined depth of cut can be obtained the Base until the installed Bit just touches the flat by loosening the Lock Lever (15) and then lowering the surface, lock into place using the Lock Lever, and adjust tool body until the Stopper Pole makes contact with the the screw to further tighten into place.
Page 16
OPERATION / OPÉRATION / DIE ANWENDUNG / OPERACIÓN / FUNZIONAMENTO / FUNCIONAMIENTO When using the Plunge Base install the Dust Extraction Insert the Guide Bar (7) into the holes in the Plunge Nozzle (2) onto the Base, secure into place using the Base and tighten the Wing Bolts.
Page 17
OPERATION / OPÉRATION / DIE ANWENDUNG / OPERACIÓN / FUNZIONAMENTO / FUNCIONAMIENTO Regularly check and replace the Carbon Brushes (3) when required. NOTE: Always change Carbon Brushes as sets. To replace, remove use a screwdriver to remove the Brush Holder Caps (26). Remove the worn Carbon Brushes and insert the new ones and replace the Brush Holder Caps.
Page 18
Thank you for purchasing your product/appliance. Should you require further assistance with your pur- chase, you can contact us at support@domu.co.uk VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24 2RW. A5P | 01...
Need help?
Do you have a question about the 3515302 and is the answer not in the manual?
Questions and answers