Osram BT Series Technical Application Manual
  1. Manuals
  2. Brands
  3. Osram Manuals
  4. Control Systems
  5. BT Series
  6. Technical application manual
Osram BT Series Technical Application Manual

Osram BT Series Technical Application Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.osram.com/ds
08/2022
Technical application guide
OSRAM BT Control
New feature: Configuration of multiple devices
Light is OSRAM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Osram BT Series

Summary of Contents for Osram BT Series

  • Page 1 08/2022 Technical application guide OSRAM BT Control New feature: Configuration of multiple devices Light is OSRAM...

  • Page 2: Table Of Contents

    2.1 BT Control devices 2.1.1 Wiring diagrams 2.2 Apps 2.3 Connectable devices 2.3.1 OSRAM DALI sensors and couplers G2 – DALI-2-certified 2.3.2 OSRAM DALI pushbutton coupler G2 – function modes 2.3.3 Limitations on connectable devices 2.4 General installation instructions 2.4.1 Safety instructions 2.4.2 Wiring instructions...

  • Page 3: Introduction

    Through the integrated Bluetooth Low Energy (BLE) radio module, it is possible to control the light via an iOS or Android smart phone by the OSRAM BT Control App or to modify the control profile by the OSRAM BT Config App. Ac- cess via Bluetooth (BT) can be restricted via password.

  • Page 4: General Information

    | General information 2 General information OSRAM BT Control devices are DALI lighting controls with a Bluetooth Low Energy (BLE) interface. All OSRAM BT Control devices are powerful stand-alone units which can be configured and controlled with a smart device.

  • Page 5: Wiring Diagrams

    OSRAM BT Control | General information 2.1.1 Wiring diagrams DALI ACU BT DALI ECO BT DALI ECO BT Control DALI ECO BT RTC DALI ECO BT RTC Control...

  • Page 6: Apps

    IOS - OSRAM BT Control App OSRAM BT Control | General Information Google - OSRAM BT Control App IOS - OSRAM BT Config App Google - OSRAM BT Config App 2.2 Apps OSRAM BT CONTROL APP OSRAM BT CONFIG APP...

  • Page 7: Osram Dali Sensors And Couplers G2 - Dali-2-Certified

    OSRAM BT Control | General information 2.3.1 OSRAM DALI sensors and couplers G2 – DALI-2-certified The following components can be combined with all three BT Control devices (all dimensions in m): Mounting height Mounting height Presence Presence – Range of third-party sensor –...

  • Page 8: Osram Dali Pushbutton Coupler G2 - Function Modes

    OSRAM BT Control | General information 2.3.2 OSRAM DALI pushbutton coupler G2 – function modes The following pre-programmed function modes 1-6 can be activated while using OSRAM BT Control devices together with the DALI pushbutton coupler G2: Name Function of input A...

  • Page 9: General Installation Instructions

    Keep these operating instructions in a safe place for future reference. You should make sure that everyone who uses OSRAM BT Control devices has read these operating instructions.

  • Page 10: Radio Optimization

    OSRAM BT Control | General information 2.4.3 Radio optimization The wireless Bluetooth Low Energy (BLE) interface is based on the Bluetooth 4.0 protocol. Connectivity range: ≤ 15 m DALI ECO BT, DALI ECO BT RTC Mounting instructions DALI ACU BT...
  • Page 11 OSRAM BT Control | General information Best practice examples: Floor-standing luminaire mounting A: Lumimnaire head B: Transition area from pole to head C: Pole General mounting rules:       Metal surrounding the antenna Non-metallic surrounding material     Wires over antenna area >...
  • Page 12 The check should be done using: — The OSRAM BT app and a mobile device for testing the range of the mobile device to the BT antenna — In case of Swarm function: A second BT Control device to test the point-to-point range between Swarm participants Please note: The result of the validation is not an index of replicability in all environments and application situations.

  • Page 13: Light Sensor Placement And Set Point For Light Regulation

    Manual adjustment of the set point The set point for daylight control can be preset individually via the OSRAM BT Config App.

  • Page 14: Control Features

    Wireless light control with the User App (BT Control). — OSRAM BT Config App access will be blocked after two hours to avoid hacking (the access will be enabled for two hours after each power cycle). One or more OSRAM DALI sensor/s connected —...

  • Page 15: Tunable White

    — Scene recall with the DALI pushbutton coupler 3.2.2 Group control Group control can be configured via the OSRAM BT Config App and used via the OSRAM BT Control App. Groupcast — Individual control of up to four groups (dimming/changing color temperature) —...

  • Page 16: Human Centric Lighting (Hcl)

    00:00 HCL will start automatically with default settings after synchronizing the real-time clock. Automatic sync done by connecting with the OSRAM BT Control or Config App. — The HCL curve can be easily adapted via the OSRAM BT Config App.

  • Page 17: Demo Mode

    Stop time — Weekdays (one or more weekdays can be chosen per timer) 3.4 Demo mode Both Apps – OSRAM BT Config App and BT Control App – provide a demo mode to simulate a connected device. Configure Press: Connect Select:...

  • Page 18: Configuration Of Multiple Devices

    OSRAM BT Control | Configuration of multiple devices 4 Configuration of multiple devices 4.1 Overview Benefits — Allows serial updating of up to 10 BT Control products (DALI ECO BT, DALI ECO BT RTC and DALI ACU BT are supported) —...

  • Page 19: Three Steps For Luminaire Production With Bt Control Products

    4.2.1 Step 1: Commissioning of a reference luminaire The reference luminaire must be equipped with an OSRAM BT Control product and the OSRAM BT Config App. Connect the reference luminaire to the controller via Bluetooth.

  • Page 20: Step 2: Upload The Configuration To Multiple Bt Control Products

    OSRAM BT Config long as no password is set. The re- App or OSRAM BT Control App. maining time is displayed next — When an admin password is set, to the device (3).
  • Page 21 OSRAM BT Control | Configuration of multiple devices Option A: Devices powered via mains (~230 V) — Each device consumes 22 mA — Protection against mains during commissioning needed Mains power supply ~230 V Option B: Devices powered via DALI (16 V —...

  • Page 22: Step 3: Assembly Of The Luminaire In Production

    This saves a lot of time and effort. Benefits for luminaires with two groups (direct/indirect light): DALI ECO BT RTC — Group addresses of DALI LED drivers can be pre-programmed, e.g. OSRAM DALI drivers can be programmed via Tuner4TRONIC (T4T) software. —...

  • Page 23: Applications And Settings

    OSRAM BT Control | Applications and settings 5 Applications and settings Different applications have different functional demands and need different system settings. Here are some application use cases with the respective functional settings: 5.1 Stand-alone luminaire/s with integrated BT Control Pendant, mounted or floor-standing luminaires with one (direct) or two (direct/indirect) light outputs 5.1.1 Floor-standing luminaire with 1 x DALI LED driver (with out-of-the-box light functions)
  • Page 24 User can switch the light on/off and dim it via smartphone — User can set a password to limit access 5.1.1.4 Additional configuration options via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 25 5.1.1.5 Password protection 5.1.1.6 Switch-off delay time When connecting to the OSRAM BT Config App for the first The switch-off delay is the time after which the controller time, a window pops up where an admin password and the will leave the “on-state”.
  • Page 26 OSRAM BT Control | Applications and settings 5.1.1.7 Standby level and time 5.1.1.9 State after power failure When activated, the light will go to the standby level after “State after power failure” defines the behavior of the the switch-off delay time has expired. The light will switch connected DALI LED drivers after a power failure.

  • Page 27: Floor-Standing Luminaire With 2 X Dali Led Drivers Separating The Direct And Indirect Light

    OSRAM BT Control | Applications and settings 5.1.2 Floor-standing luminaire with 2 x DALI drivers separating the direct and indirect light 5.1.2.1 Requirements The floor-standing luminaire can be switched and dimmed with two pushbuttons. Indirect light The integrated presence sensor automatically detects pres- ence and turns the light on (and off again after a 15-minute delay time).
  • Page 28 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see chapter 5.1.2.3 ff.)! 5.1.2.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 29 OSRAM BT Control | Applications and settings The following features are a selection of the most popular project-specific adaptations. There are also many additional settings which can be looked up in the app. 5.1.2.5 Password protection Please see 4.1.1.5: Password protection 5.1.2.7 Daylight harvesting (DLHV)
  • Page 30 An inde- includes an automatic activation of the Human Centric pendent control of different groups has to be adapted Lighting (HCL) function as soon as the OSRAM BT Control accordingly: App is connected. The automatic HCL function will override the DLHV function.

  • Page 31: Floor-Standing Luminaire With 1 X Dali Led Driver And Active Hcl Function

    OSRAM BT Control | Applications and settings 5.1.3 Floor-standing luminaire with 1 x DALI LED driver and active HCL function 5.1.3.1 Requirements The floor-standing luminaire can be switched, dimmed and tuned (Tunable White) with two pushbuttons. Indirect light The integrated presence sensor automatically detects pres- ence and turns the light on (and off again after a 15-minute delay time).
  • Page 32 The user can set a password to limit access. 5.1.3.4 Additional configuration options via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App. For using the HCL function, the BT Config App configuration is not mandatory, but enables more flexibility to adapt the behavior to the requirements of the customer.
  • Page 33 The firmware of the DALI ECO BT RTC Control device consists of a pre-defined HCL curve, which can be automatically started by connecting the OSRAM BT Control App, including automatic synchronization of the real-time clock. If the pre-defined light curve does not fit to the customer requirements, the curve can be easily adapted and stored as a new HCL curve.

  • Page 34: Single-Room Applications With Integrated Bt Control

    OSRAM BT Control | Applications and settings 5.2 Single-room applications with integrated BT Control Single office, open-plan office, corridor or classroom applications with automatic sensor control and/or manual pushbutton control for pendant, mounted or floor-standing luminaires with one (direct) or two (direct/indirect) light outputs.
  • Page 35 The user can set a password to limit access. 5.2.1.4 Additional configuration options via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App. The BT Config App configuration is not mandatory, but enables more flexibility to adapt the behavior to the requirements of the customer.
  • Page 36 5.2.1.5 Password protection 5.2.1.6 Switch-off delay time When connecting to the OSRAM BT Config App for the first The switch-off delay is the time after which the controller time, a window pops up where an admin password and the will leave the “on-state”.
  • Page 37 OSRAM BT Control | Applications and settings 5.2.1.7 Standby level and time 5.2.1.9 Manual setting of light regulation When activated, the light will go to the standby level after Depending on the availability of natural daylight and the the switch-off delay time has expired. The light will switch room setup, the light regulation value might need to be set after the standby time has expired.

  • Page 38: Meeting Room With Scene Control

    OSRAM BT Control | Applications and settings 5.2.1.10 State after power failure “State after power failure” defines the behavior of the connected DALI LED drivers after a power failure. Change the state after power failure Open the main menu. Open “Current configuration”.
  • Page 39 The user can set a password to limit access. 4.2.2.4 Additional configuration options via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App. The BT Config App configuration is not mandatory, but enables more...
  • Page 40 OSRAM BT Control | Applications and settings Important note After powering up the controller, it can be configured with the BT Config App for two hours only (as long as no admin password is stored). After the two-hour delay time has expired, connecting to the controller with the BT Config App is blocked.

  • Page 41: Classroom With Daylight Harvesting (Dlhv) Plus Light Group Offset

    OSRAM BT Control | Applications and settings 5.2.2.8 Scene creation The meeting room light should be able to change just by clicking on a pushbutton, based on two different lighting scenarios: “Meeting” and “Presentation”. Scene 1: Meeting Scene 2: Presentation —...
  • Page 42 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see chapter 5.2.3.4 ff.)! 5.2.3.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 43 OSRAM BT Control | Applications and settings 5.2.3.6 Activation of semi-automatic mode 5.2.3.7 Grouping (manually on, automatically off) According to the classroom requirements, the luminaires need to be grouped to realize the four different light groups. Activation of semi-automatic mode Group the luminaires Open the main menu.
  • Page 44 OSRAM BT Control | Applications and settings 5.2.3.8 DLHV function with defined light group offset Depending on the availability of natural daylight and the room setup, the light regulation provides the right amount of light according to the needs of the customer. As the DLHV function is dedicated to group 1 only, the other light groups – group 2 and group 3 –...

  • Page 45: Corridor Including Standby (Infinite Timer)

    OSRAM BT Control | Applications and settings Change of default setup for group 4 Open the main menu. Open “Current configuration”. Open “Push Button Setting” and click on “Configure” for the “Push Button Coupler”. Please identify the dedicated PBC of group 4 by pressing the connected pushbutton.
  • Page 46 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see chapter 5.2.3.4 ff.)! 5.2.4.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.

  • Page 47: Open-Plan Office Including Standby

    OSRAM BT Control | Applications and settings 5.2.4.6 Change of default setup 5.2.4.7 Standby level and time The default setup of the control unit is the “Single Office” When the “Corridor” mode is activated (see chapter mode, which needs to be changed to the “Corridor” mode first.
  • Page 48 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see chapter 5.2.3.4 ff.)! 5.2.5.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 49 OSRAM BT Control | Applications and settings 5.2.5.6 Change of default setup 5.2.5.7 Standby level and time The default setup of the control unit is the “Single Office” When the “Open-plan office” mode is activated (see chapter mode, which needs to be changed to the “Open-plan office”...
  • Page 50 OSRAM BT Control | Applications and settings 5.2.5.8 Grouping 5.2.5.9 DLHV function with defined light group offset According to the open-plan office requirements, the luminaires Depending on the availability of natural daylight and the need to be grouped to realize the three different light groups.

  • Page 51: Open-Plan Office Including Swarm Function

    OSRAM BT Control | Applications and settings 5.2.6 Open-plan office including Swarm function 5.2.6.1 Requirements The open-plan office luminaires are floor-standing luminaires in the desk area and downlights in the corridor area. The desk luminaires are wirelessly interconnected and react as a big swarm as soon as presence is detected by one of the Swarm luminaires.
  • Page 52 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see chapter 5.2.6.4 ff.)! 5.2.6.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 53 OSRAM BT Control | Applications and settings 5.2.6.6 Activation of Swarm feature via Expert mode 5.2.6.7 Swarm zone creation Depending on the room setup, the independent desk lumi- Activate the Swarm feature naires can be integrated into a Swarm zone. A wireless in-...

  • Page 54: Open-Plan Office Including Swarm Function And Zone Division

    OSRAM BT Control | Applications and settings 5.2.7 Open-plan office including Swarm function and zone division 5.2.7.1 Requirements The open-plan office luminaires are floor-standing luminaires in the desk area and downlights in the corridor area. They are divided into five light zones.
  • Page 55 Attention: For this application, the out-of-the-box features are not sufficient. Additional configuration via the OSRAM BT Config App is required (see 5.2.5.4 ff.)! 5.2.7.4 Configuration via the OSRAM BT Config App The controller can be configured via smartphone with the OSRAM BT Config App.
  • Page 56 OSRAM BT Control | Applications and settings 5.2.7.6 Activation of Swarm feature via Expert mode 5.2.7.7 Creation of different Swarm zone/s Depending on the room setup, the independent desk lumi- Activate the Swarm feature naires can be integrated into different light zones. A wireless...
  • Page 57 As long as the BT Control device is connected to the OSRAM BT Config App, the Swarm feature is not working cause the Swarm connection is blocked by the app! Therefore, it is necessary to disconnect the OSRAM BT Config App first. The Swarm connection/s between the BT controllers will only be established afterwards.
  • Page 58 OSRAM GmbH OSRAM Lighting Middle East FZE OSRAM OOO Russia DS Headquarters Germany Dubai – United Arab Emirates Phone: +7 (499) 649-7070 Phone: +49 89 6213-0 Phone: +971 4 523 1777 E-mail: ds-russia@osram.com E-mail: contact@osram.com E-mail: ds-mea@osram.com OSRAM Romania S.R.L.

This manual is also suitable for:

Dali eco btDali eco bt rtcDali acu btBt control

Table of Contents