Mounting Power-1 In A Rack; Connecting The Power Cables And Power On - Check Point Power-1 P-10 Getting Started Manual

Configuring Power-1

Mounting Power-1 in a Rack

Mount the system in the rack with the network ports facing the front of the rack.

Connecting the Power Cables and Power On

1. Connect the power cables.
2. On the back panel, turn on the Power button to start the appliance.
14 | Power-1 Getting Started Guide
Note - When a power supply fails or is not connected to the outlet, an
alarm sounds continuously. If you hear the alarm, replace the faulty
power supply immediately, and connect the new unit to an A/C outlet
("Removing the Power Supply" on page 36).