Panasonic BT-LH1760W Operating Instructions Manual page 27

Main Menu
(continued)
■ "PIXEL TO PIXEL" and "PIXEL POSITION"
The "PIXEL TO PIXEL" function allows you to check images at their actual pixel resolution (1080I/P signals only).
Press the button ([FUNCTION1] to [FUNCTION5] (
been assigned to turn the function on. Then press the button ([FUNCTION1] to [FUNCTION5] (
which the "PIXEL POSITION" function has been assigned to position the display of signals. (This assumes that
the "PIXEL TO PIXEL" and "PIXEL POSITION" functions have been assigned to any of the [FUNCTION1] to
[FUNCTION5] buttons.)
Sub menu Settings
*1*2
PIXEL TO PIXEL
PIXEL POSITION
*1 The following settings are disabled in PIXEL TO PIXEL mode.
Setting "ANAMO" to "ON", and setting "SCAN" to "UNDER" in "VIDEO CONFIG"
Any "HV DELAY" setting in "FUNCTION"
"MARKER" display
*2 Enabled during "SDI1", "SDI2" and "YP
■ "PIXEL POSITION" display position sequence
➀
PIXEL POSITION:
➀
CENTER
➃
RIGHT BOTTOM
Description
OFF Tailors the image display size to the input signal size.
ON Compatible formats
1080/60I/59I/50I/60P/59P/50P/30P/29P/25P/24P/23P/24Psf/23Psf
CENTER Positions the display of signals in PIXEL TO PIXEL mode.
LEFT TOP <CENTER> Center of the screen
RIGHT TOP <LT>
RIGHT BOTTOM <RT>
LEFT BOTTOM <RB>
<LB>
P " input.
B R
➁ ➂ ➃ ➄
➁
LEFT TOP
➄
LEFT BOTTOM
page 23)) to which the "PIXEL TO PIXEL" function has
Underlined values indicate factory defaults.
Left Top
Right Top
Right Bottom
Left Bottom
➀
.......
page 23)) to
➂
RIGHT TOP
27