Advertisement
MZ3-V01
3-Level Switch
Function
•
Electronic 3-level switch with touch panel
•
Design according to Feller EDIZIOdue®
•
Manual operation with up to 3 Levels: MIN, MID, MAX
•
Automatic reset of the level MAX to specified level (per default no reset)
•
One 0...10 VDC output to output defined voltage levels
•
Password protected settings
•
Copy of settings with accessory (AEC-PM2)
Applications
Comfort ventilation, for example for very well insulated living rooms which
must be ventilated according to regulations or for controlling dampers, valve
drives, blinds or windows, etc.
General description
The MZ3-V01 is a microprocessor-controlled precision level switch with touch
panel. Through parameters the level switch may be configured. Settings such as switching levels for each step may be
adjusted. The level switch is configuration with a programming device called OPA-S. Configuration can as well be updated
using a remote memory device called AEC-PM2.
Safety
DANGER! Safety note
This device is intended to be used as 3-level switch. Where a device failure endangers human life and/or
property, it is the responsibility of the client to add additional safety devices to prevent or detect a system failure
caused by such a device failure.
The device contains electronic components and must not be disposed of with household waste.
Types and ordering
Product name
Product No.
MZ3-V01-B3-T3-W
40-100283
MZ3-V01-G3-T3-B
40-100284
Accessories
OPA-S
40-500006
AEC-PM2
40-500130
Interface to the ventilation system
The 3-level switch works with all systems that are designed for a 0...10 VDC or 2...10 VDC input signal.
Doc: 70-00-0834A V2.5, 20230220
Subject to alternation
Description
- Blue LED
- White frame
- Lettering: MIN, MID, MAX
- Green LED
- Brown frame (RAL 8028)
- Lettering: MIN, MID, MAX
Programming and display device
Memory-Device. Used for copying settings
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
MZ3-V01
MAX
MID
MIN
Features
Compact positioner/controller in a
Feller EDIZIOdue® frame, with one
0-10 VDC output. Operation as 3-
level switch with touch panel.
LCD display for surface mounting or
handheld operation.
Stores settings of MZ3
Page 1-6
Advertisement
Table of Contents
Related Manuals for Vector MZ3-V01
Summary of Contents for Vector MZ3-V01
- Page 1 General description The MZ3-V01 is a microprocessor-controlled precision level switch with touch panel. Through parameters the level switch may be configured. Settings such as switching levels for each step may be adjusted. The level switch is configuration with a programming device called OPA-S. Configuration can as well be updated using a remote memory device called AEC-PM2.
-
Page 2: Technical Data
0 V, -24 VDC, internally connected to signal common Power supply: 24 VAC, +24 VDC Not used, do not connect Analog output ventilation: 0/2…10 VDC Doc: 70-00-0834A V2.5, 20230220 © Vector Controls GmbH, Switzerland Page 2-6 Subject to alternation www.vectorcontrols.com... -
Page 3: Mounting Instruction
MZ3. Dimensions mm (in) The MZ3-V01 is so designed that it can be incorporated into a commercially available flush box (Feller EDIZIOdue® frame and mounting plate are included). Display and Operation... -
Page 4: Setting The Parameters
OPA-S. The operating unit OPA-S must be connected for the adjustment of the parameters with the MZ3-V01. Carefully lift the front panel of the MZ3-V01 and pull it away to the front. Plug the connecting cable of the OPA-S operating unit into the rear part of the MZ3-V01. - Page 5 MZ3-V01 Empty page. Doc: 70-00-0834A V2.5, 20230220 © Vector Controls GmbH, Switzerland Page 5-6 Subject to alternation www.vectorcontrols.com...
- Page 6 MZ3-V01 Smart Sensors and Controls Made Easy! Quality - Innovation – Partnership Vector Controls GmbH Switzerland info@vectorcontrols.com www.vectorcontrols.com Doc: 70-00-0834A V2.5, 20230220 © Vector Controls GmbH, Switzerland Page 6-6 Subject to alternation www.vectorcontrols.com...
Need help?
Do you have a question about the MZ3-V01 and is the answer not in the manual?
Questions and answers