Table of content Chapter 1 pre-installation Precautions Pre-installation Precautions:------------------------------------------- 2 Check the Package Contents:-------------------------------------------3 Control Box Appearance Guide:----------------------------------------3 Control Box Installation Procedure:----------------------------------- 4 E Touch App Introduction and Setting:-------------------------------- 6 When E Touch App cannot find the control box:--------------------- 7 E Touch App can control multiple control box:----------------------- 8 E Touch App name setting :-------------------------------------------- 10 E Touch App control type setting:------------------------------------- 11...
3. Please confirm if your iPhone had installed "Smart Button" APP. If you have not installed Smart Button APP to your phone, please search "Smart Button" APP in APP STORE and install. Link the URL directly: IPhone https://itunes.apple.com/tw/app/etouch/id654915177?mt=8 E Touch APP download link QR CODE Google Play https://play.google.com/store/apps/details?id=net.vector.mobile.ns20_4p.dingyu &feature=search_result#?t=W251bGwsMSwxLDEsIm5ldC52ZWN0b3IubW9iaWxl Lm5zMjBfNHAuZGluZ3l1Il0.
Check the Package Contents: Control Host Machine *1 Manual *1 Power cord *1 Network Line *1 Control Box Appearance Guide: : Connection indicator lamps: Three lamps to indicate different states Red lamp: This lamp is on when the phone connect successfully, if not, it will be off. Yellow lamp: This lamp is on when the phone connect to the Internet, if not, it will be off.
Control Box Installation Procedure: 1. Plug power cord to power outlet of control box, and then connect to the power supply. Then turn on power switch 2. Plug network cable to network jack of control box, and connect another side to same domain of WIFI AP.
Page 6
Plug connector plug of the controlled device into Control Box For example: If you want to control the fans, you have to plug the fan outlet into one of four control socket of Control Box. (Note) Control Box power input is 100 ~ 240V AC, for multinational use, and it’s in line with Taiwan regulatory, the U.S.
ETouch APP Introduction and setting: 1. Find the ”E Touch icon on the mobile phone desktop, and press it of E Touch button to entry E Touch APP 3. Scan QR code Setting Photo Press here and add a New device Add an admin Press here to get...
When Smart Button APP is on, and it will search for Control Box in the same network automatically. Once the connection is done successfully, it will automatically bring out successful setting name and operation mode as follows: Control Box name When Smart Button APP cannot find the control box:...
If you cannot find WIFI connection, you can press the "Re-search" button in home screen. Smart Button will start searching for Control Box in the network. After you find Control Box, the home screen will appear default name of Control Box, and the default names of four controlled devices as follows: Back The main function...
Page 10
E Touch APP setting screen: Press setting button Setting Screen Remove control box...
Click directly to change the name Change name and function Schedule management 3G management Change the name of device Change the name of device Change the name of 4 ports Control socket.
E Touch APP setup the control type: You can modify the name You can modify the control type There are three kinds of control types: 1. Toggle Type: One click to be on, click again to be off. 2. Door Type:One click to be on, and recover in few seconds. 3.
Page 13
The door type need to setup time: You can modify the name You can modify the control type You can modify the setting time. Select open Screen:...
Page 14
You have to re-set intervals in Neon Type: You can modify the name You can modify the control type You can modify Neon Types intervals Select Interval Screen:...
E Touch APP schedule setting screen: Return the setting screen Schedule setting screen 接著 Add a new schedule Schedule setting screen: For example: you can set at 3:57every afternoon to turn on lamp2 power automatically Click here to set Sunday to Monday Click here to select four-port outlet Click here to turn on power Click here to adjust to4:22 PM...
Scan the QR CODE on phone The machine specifications list: Model:NS20-4P Manufacturer:Vector Technology Corporation (VTC) Production:Made in Taiwan Dimensions:15.8 x 10.5 x 3.9 cm Weight:510g Max power input / output:100~240V AC 50/60Hz 10A Overload protection:Turn off automatically when the current total of four Ports are more than 7A Operating temperature: 0~50°C...
Technical support and services: Green Market http://www.greenmarket.com.tw Official Website: Customer Service service@greenmarket.com.tw E-mail: Customer Service 02-26801206 Phone: Office Hours: Monday to Friday 9:00 to 17:00 Green Market 8F., No.5, Ln. 122, Sec. 2, Ganyuan St., Shulin Dist., New Address Taipei City 238, Taiwan Online Customer Go to https://www.greenmarket.com.tw/ Service URL:...