Advertisement
Quick Links
MIMO Antenna
Ref. 130990
Assembly, operation, and maintenance instructions
Contents of the box
A
B
Installation
1
Mast mount
E
A
PH #2
E
D
By
D
C
TO TV
TO ANT
USB
G
F
NEEDED TOOLS
E
10mm wrench
H
WITH A SUPPORT
E
Attach the plate
in the right position as
shown in the pictures. Screw it to the antenna
A
using both screws
D
.
Place the antenna in a vertical position and attach
it to the mast using the clamp
C
.
PH #2
Screw driver
(not included)
B
and the nuts
B
C
Advertisement
Related Manuals for Televes evoca 130990
Summary of Contents for Televes evoca 130990
- Page 1 MIMO Antenna Ref. 130990 Assembly, operation, and maintenance instructions Contents of the box NEEDED TOOLS 10mm wrench PH #2 TO TV TO ANT Screw driver (not included) Installation Mast mount WITH A SUPPORT Attach the plate in the right position as shown in the pictures.
- Page 2 TABLE MOUNT WITH A REFLECTOR Remove the clamp and the screws from the plate using a 10mm wrench. Put the plate in the right position as shown by the arrow. Screw it to the antenna using both screws Rest the antenna on the table in a vertical position as shown in the picture below.
- Page 3 CONNECTION 1. 5G OUT 2. VERTICAL OUT + V 3. HORIZONTAL OUT + V Safety Instructions LIGHTNING PROTECTION wire, number eight (8) or larger. Example of antenna grounding as per The down lead wire from the antenna to National Electrical Code, ANSI/NFPA 70 If installed outdoors, be sure the antenna the lightning arrestor and the mast ground system is grounded so as to provide...
- Page 4 Televes USA LLC. Norfolk Tech Center 16596 E. 2nd Avenue Aurora, CO 80011 televes.usa@televes.com www.televes.com...
Need help?
Do you have a question about the evoca 130990 and is the answer not in the manual?
Questions and answers