How To Assemble The Stand-Base (Depending On The Model) - Samsung 5 Series User Manual

Moving to the remembered position
1 Complete Step 1 of Entering the menu.

Pressing a Colour (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
You can move the wall mount to one of the 3 pre-set positions
➢
by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the
➢
position display will disappear.
For installation, refer to the Installation Manual provided with the wall
➢
mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
➢
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
➢
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.
➢
➢ 42 inches model is not compatible with the older wall mount model (WMN5090A).
How to assemble the Stand-Base
Using the 6 screws for securing the stand base and the
monitor, firmly attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
BN68-01434A-Eng.indb 47
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
English - 4
Auto Wall-Mount
Position 1
Position
Adjust
(depending on the model)
In case of installing your TV on the wall,
close the cover (1) on the stand-base
connection part using two screws for
hiding.
►
►
1 2 3
Save Center
INFO
2008-03-10 오후 3:31:33