Advertisement
ALIGNMENT PROCEDURES
This software do not need to install. Double-click the
DaAd Debug（A/D Debug）
Get the current battery voltage
Get the current SQ RSSI
Get the current SQ Noise
1. Battery voltage setting：No need to use this function, we've already set, so pls do not alignment this
parameter.
2. RSSI setting：There are 7 RSSI levels should be alignment. Every level has its own RF LEV (see as
bellow).
RSSI Level
AM/FM
RF LEV
Procedure: Set the "RF LEV" on equipment to -123dBm，and the select the RSSI level "0". If the channel
is at FM, choose "FM" in the software, then press Get A/D" of SQ Rssi,, then press "Set File" to store the
setting. After that, continue to set the RSSI Level "1" and the rest level. When all of the 7 RSSI levels set,
switch the radio to AM, then using the same way to set RSSI Level at AM. (See as bellow)
need
0
1
-123
-120
Page 12/42
icon.
RSSI & Noise level
4
7
-109
-97
To get the value that have been
written in the radio.
To store the new set value.
10
13
-85
-73
15
-48
Advertisement
