Panasonic Toughbook CF-W8EWAZZJM Operating Instructions Manual page 27

CAUTION
You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: "!" "$") are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
10 Installing the driver
(Start) and input "c:\util\drivers\amt\MEI\setup.exe" in [Start Search] then press Enter.
A Click
Follow the on-screen instructions.
(Start) and input "c:\util\drivers\amt\LMS_SOL\setup.exe" in [Start Search] then press Enter.
B Click
Follow the on-screen instructions.
Release AMT configuration
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) AMT] and press
5 Select [Disabled] and press
6 Press .
Esc
7 Select the [Exit] menu, and select [Save Current Values], and press
At the confirmation message, select [Yes] and press Enter.
8 Select the [Security] menu, and select [AMT Configuration], and press
9 Select [Reset AMT Configuration] and press
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
If the password is requested, enter the Supervisor Password.
10 Press when the "Intel(R) ME unconfiguration in progress" message will appear.
Y
The computer will restart.
11 Turn off the computer.
or while [Panasonic] boot screen is displayed.
F2 Del
.
Enter
.
Enter
Enter
Enter
.
.
Enter
.
.
Enter
27