Reinstalling Software - Panasonic Toughbook CF-W5MWEZAJM Operating Instructions Manual

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk
data will be erased.
Back up important data to other media or an external hard disk before reinstallation.
CAUTION
Do not delete the recovery partition on the hard disk.
This partition contains data to help recover your system.
The disk space in the partition is not available to store data.
Preparation
Prepare the Product Recovery DVD-ROM (included).
Remove all peripherals.
Connect the AC adaptor and do not remove it until reinstallation is complete.
NOTE
Even if reinstallation is performed, the number of times of DVD's region code setting will not be reset.
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 Write down all of the contents of the Setup Utility and press
At the confirmation message, select [Yes] and press Enter.
3 Select the [Boot] menu, then select [USB CDD] and press
top of [Boot priority order].
4 Set the Product Recovery DVD-ROM into the CD/DVD drive.
When the disc cover does not open.
A Press F10.
At the confirmation message, select [Yes] and press Enter .
The computer will restart.
B Press F2 while [Panasonic] boot screen is displayed.
C Set the Product Recovery DVD-ROM.
5 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
6 Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
7 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
8 Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default.]
You will have a single partition.
[Reinstall Windows to the operating system partition.]
You can keep the partition structure.
9 At the confirmation message, click [YES].
Reinstallation starts automatically. (It will take approximately 30 minutes.)
Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-
wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.
10 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.
11 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
24
Hard disk
while [Panasonic] boot screen is displayed.
F2
while [Panasonic] boot screen is displayed.
F2
Recovery partition
(approximately 2 GB)
Area usable by Windows
.
F9
until [USB CDD] is at the
F6