Midas Touch MDL-3160 User Manual

MDL-3160 Smart Drawer Lock User Manual
Lock : The handle groove is turned in the red dot
direction, which is the locked position.
Power on：Tap the sensor once and red light
will flash, then you will hear a beep. After leaving,
the light turns into blue.
Unlock : Press the sensor once until the light
turns into green and beeps. Afterwards, turn the
handle groove to 3:00 direction and register or
clear.

Register Mode :

manager has the authority to clear.
Manager Registration：
Go to the unlocking place and wait for the light turns into blue.
After turning into blue, press the fingerprint sensor until hearing
beep. → leave the sensor and the light flashes blue and purple. →
Press the sensor again（Start to register）→the purple light beeps
→turns into blue →Repeat the action three times（You will hear a
beep after every successful sensing）→Green light lasts after
successful scanning. →Long beep（Successful registration）→Turns
into blue light
User Registration：
Go to the unlocking place and wait for the light turns into blue.
After turning into blue, the manager should press the fingerprint
sensor until light flashes green and turns into purple. → Leave the
sensor and the light flashes red and blue. →The user could register
and the light turns into green upon successful registration. It will
then turns into blue after a long beep.
Clean-up Mode：
Confidential
The manager is the first register, and only the
1
All rights reserved. Midas Touch, Inc.