Advertisement
SPECIFICATION FOR GTW-P50M503 PLASMA DISPLAY
2.4.3 Horizontal Size (Max.)
Vertical Size (Max.)
2.4.4 Maximum Brightness Level:
a. 100% center block white
pattern (mosaic)
b. Raster background
2.5.
Operation:
Main unit button
IR Remote Control
2.5.1 Adjustable Items:
Analog RGB input
DVI input
Mode 1~31ð over full-scan
Mode 1~31ð over full-scan
Timing Mode 1
More than 25FL
(while pressing recall button to set default brightness)
Less than 0.4FL
(while pressi ng recall button to set default brightness)
Main power switch (power ON /OFF)
Power ON/OFF
Input Select (RGB -> DVI run in cycle)
Menu key -,+
Adjustment -,+
Power on/off
MUTE
Display
Input Select (same as Main unit button)
Volume -,+
Wide:
Analog RGB input: 4:3/16:9
Menu -,+
Adjustment -,+
RECALL
PIP, SOURCE, SWAP, POSITION
USE FOR TV MODE:
V-CHIP/ SET
FAV.CH, FAV.SET, QV, CCD, MTS, CH LOCK,
SLEEP TIMER,
Number Select, CH ▲▼
DIRECT KEY:
POWER ON, POWER OFF, RGB, DVI
TV(this mode is not use)
AV1(this mode is not use)
AV2(this mode is not use)
COMPONENT1/2(this mode is not use)
PICTURE:
Input Source, Brightness, Contrast, V-center, V-size,
H- position, H-width, Color Temperature, Clock Phase
SOUND:
(this mode is not use)
Bass, Treble, Surround, BBE, Bass Extension, Volume,
INNER SPK, Audio Output
PIP/POP: (no function under this input)
TV:
(this mode is not use)
OTHER:
OSD Timeout, OSD Brightness, OSD Background, Sleep,
OSD Language, Power Save, Power On Sequence, Reset
PICTURE:
Input Source, Brightness, Contrast, V-center, V-size, H-
position, H-width, Color Temperature
SOUND: (same as Analog RGB input)
PIP/POP; (no function under this input)
TV;
(this mode is not use)
OTHER:
OSD Timeout, OSD Brightness, OSD Background, Sleep,
Power Save, Power On Sequence, Reset
2-4
(this mode is not use)
(this mode is not use)
VER1.0
Advertisement
