Related Manuals for ARUSNAVI ELECTRONICS ARNAVI BEACON
Summary of Contents for ARUSNAVI ELECTRONICS ARNAVI BEACON
- Page 1 ARNAVI BEACON Autonomous satellite device for determining and transmitting coordinates via GSM network. USER MANUAL Version from 1.40 Arusnavi LLC...
-
Page 2: Table Of Contents
Content GENERAL INFORMATION ......................3 1.1 Using purpose ........................3 1.2 Working principle........................3 1.3 External view of the device....................4 1.4 Technical specifications......................4 INSTALLATION GUIDELINESS ....................5 2.1 Installation procedure ......................5 2.2 Installation guidelines ......................6 2.3 Indication of the work ...................... -
Page 3: General Information
GENERAL INFORMATION 1.1 Using purpose BEACON is a portable satellite device designed to determine the exact location of the tracking object. Transmission of coordinates of the object is carried out by GPRS Protocol.. BEACON is used for: 1. Location determination of stolen vehicles. 2. -
Page 4: External View Of The Device
The device uses GPS/GLONASS satellite navigation system or LBS positioning (by mobile operator towers) to determine the location. 1.3 External view of the device. Picture 1 1.4 Technical specifications. Table 1 Parameter Value Dimensions Diameter 78 mm, height 23 mm Case Protected by IP67... -
Page 5: Installation Guideliness
INSTALLATION GUIDELINESS Location of device elements on the board: 1. The nano-SIM slot 1. 2. The nano-SIM slot 2. 3. Debug button (force synchronization of settings with web-configurator and sends the package to the server). 4. Micro-USB connector (for diagnostics and software update) Picture 2 2.1 Installation procedure... -
Page 6: Installation Guidelines
2.2 Installation guidelines For the best signal reception from satellites, the beacon should be placed with the logo embossed upwards. The location of the device under any other is acceptable. The body of the lighthouse from the logo can not be obscured by metal objects. ATTENTION! The beacon should not be placed near highly heated parts of the car. -
Page 7: Indication Of The Work
2.3 Indication of the work The beacon has an led indicator that can work in several modes: 0-do not use Turn off the led at all and show no indication 1-device start indication When you exit sleep mode to make a series of flashes (5-10 PCs) 2-device operation indication In addition to the start display, show the overall operation of the device short flash navigation... -
Page 8: Configuration
CONFIGURATION 3.1 Configuration via WEB-Configurator A WEB-Configurator is a cloud service for remote configuring or updating the software of a device or group of devices without physically connecting. For using the web Configurator, you need an account (login / password), which can be obtained from the technical support service support@arusnavi.ru. - Page 9 Section «Operation mode» The section allows you to configure the parameters of the beacon in different modes. Picture 8 Interval mode: The device operates in the interval mode by default, i.e. the <motion sensor Mode> parameter is in the " off " state, and trajectory testing is not available. Determination of coordinates and communication is carried out strictly with a specified time interval.
- Page 10 <Motion sensor mode> - allows you to set the motion sensor to the following States: off, always on, on in interval 1, on in interval 2, on in interval 1 and 2, online mode. <Driving activity time> - the duration of continuous movement of the vehicle in seconds to record the fact of the beginning of the movement.
- Page 11 Section «System set»: Picture 9 <Managing password> - the password to authorize the device. Used for remote access, such as sending SMS and TCP commands. Valid symbols are: , " ", " ". The maximum length is 10 symbols. <Time Zone> - offset time relatively UTC.
- Page 12 Section «Data transfer»: Picture 10 The beacon can simultaneously transfer data to two servers and three phone numbers. Depends on your needs, you have to specify settings for one or more channels of data loading. Server 1 and server 2 setting: <DNS/IP>...
- Page 13 Section «SIM-card setting»: Picture 11 The device supports simultaneous operation of two SIM-cards. For each SIM-card, individual data transfer settings are set, in particular, the permission to work in roaming. When using two SIM cards, the first slot is the priority. The second SIM-card is used in cases when the use of the first SIM-card is prohibited by the settings or the attempt to communicate was failed.
- Page 14 Settings synchronization At the top of the settings window, please click "save settings". Picture 12. Then in the general table of devices in the field "Status" there will be an entry "settings" which shows that the new settings are set to the device, but they are not applied on the device yet. To apply the new settings, send an SMS or TCP command.
-
Page 15: Setting Via Pc
Picture 14. For updating the beacon software, please: * Select a device (check the box or select it) * Open the "Install firmware for selected devices" tab» * Select device type, firmware version and click " Apply» The "firmware" entry will appear in the "Status" field in the General table of devices, which shows that the device has a new firmware, but the update has not yet occurred. - Page 16 The status of the debug button. Clicking the button will download the settings from the web- configurator and generate a package with its subsequent unloading according to the settings. It means: -button is pressed; - button is not pressed. 1. The reason of awakening - other event, - interval, 2.
- Page 17 - error sending 6. Logbook. Required for service and displays system information about the operation of the device. The application also has the following functions: device settings, software updates, viewing the black box. Setting via app The procedure for configuring the beacon is discussed in detail in the section "Configuration via web-configurator".
- Page 18 Picture 17. Picture 18. Page | 18 User manual [1.0]...
- Page 19 Picture 19. Picture 20. "Record to device" button applies the selected settings to the device, after which the beacon automatically sends the settings to the web Configurator. If you are unable to connect to the network when you save the settings, the settings will be synchronized the next time you connect. Page | 19 User manual [1.0]...
- Page 20 The current settings can be saved to a separate file by clicking "Save to file". Saved settings can be applied on another device using the "Read from file"button. Software update Press the "Change software" button to open the firmware selection window (picture 21).
- Page 21 After the software updating is over, the device will disconnect and reconnect again. Please check the software version in the application. The device is ready to use if the displayed software version has been updated. Picture 22 Device's archive The beacon has a cyclically updated black box that stores 100 recent messages.
-
Page 22: Sms, Tcp Commands
3.4 SMS, TCP commands Text commands can be sent via any of the available channels: SMS or TCP. Regardless of the transmission channel used, text commands have a single list and syntax. The list of available commands is shown in table 2. Text commands are divided into: configuration commands, control commands, information commands. - Page 23 Table 2 Format Command description Setting commands <access_password> Beacon configuration command. Detailed description of the *SETP*<parameter_list> command in the section "setting via SMS, TCP". Control commands < access_password>*SERV*1.4 Please update the software via the web-configurator, even if the assigned and current versions are the same. <...
- Page 24 Setup via SMS, TCP Configuration can be done from any of the two servers used by the beacon or any phone number. The structure of the message with the command to change settings is as follows: <access_password>*SETP*<changing_parameters_list> By default, the field <access_password>is set to 123456. The field <...
- Page 25 PIN for SIM 2 0-9999 USSD balance request for SIM 1 0-9, "*", "#" USSD balance request SIM 2 0-9, "*", "#" SIM1 balance request frequency. 0 - do not use 1 – at every start, 2 - once a day, 3 - once a week, 4 - once a month, 5 - once a year.
- Page 26 0 - always by GSM, 1 - always by satelites, 2 – by satellites every 2 time, 3 - by satellites each 3 time, 10 - by satellites each 10 time Max active time, min 1-250 Motion sensor sensititvity 0-10 Setting synchronization with WEB configurator 0 - do not use 1 –...
- Page 27 SETP commands examples 123456*SETP*#39=4 – Change the sensitivity of the motion sensor (Example of editing one parameter). 123456*SETP*#25=1#30=20#31=0– Setting the connection interval: 20 minutes (Example of editing several parameters). 123456*SETP*#32=15#33=30#34=500#35=60 – Change of parameters of trajectory working in online mode by angle, speed, distance, time. ...
Need help?
Do you have a question about the ARNAVI BEACON and is the answer not in the manual?
Questions and answers