Alarm Index - S&P CAD HE 325 EC V TSP Manual

8. ALARM INDEX

Through the information icon
This Led will show the alarm (check see table) in case of produce the failure of
some critical components of the unit or simply by notification (replacement
filters, by-pass manual mode, supply temperature <11ºC). Depending on risk level
of the alarm generated, the control will manage the response required. If it is
necessary, the unit will be stopped for safety reasons.
it is possible to supervise the status of the unit.
Unit stops.
Every 2 hours the unit starts for
5 minutes to check if conditions allow
normal operation.
37