Advertisement
Repeat step 2 to do VGA input sources,
ASTRO-859 signal setting to1024X768 60Hz. (PG2 mode: Timing 963 and Pattern 924 100% color bar.)
4-2. Color Temperature Adjustment & Check
4-2.1. Set the signal generator to RGB,
white pattern.
4-2.2. Press up or down key of remote control to select "Cool", Press 「ENTER」 key to enter the item.
RGAIN, GGAIN, BGAIN, ROFFSET, GOFFSET, BOFFSET, drive values are set for COOL, NORMAL
WARM independently.
4-2.3. Select 「Cool 」
Step 1.First Turning Gain parts of RGB.
(1) Cool spec.:
x= 0.267±0.030
y= 0.271±0.030
(2) If the x and y value are larger than specification,
Decrease
Increase B
(3) If the x or y or both x and y value is/are smaller than specification.
Decrease B
(4) According to a x and y value, please following adjustment of (4)-1 or (4)-2.
(4)-1 If x value is higher than spec
Decrease R GAIN drive from default value.
1024*768, 60HZ(ASTRO-859: PG1 856), Level:0.56V(80%
drive from default value.
R GAIN
drive from default value.
GAIN
drive from default value
GAIN
8
). Full
,
and
Advertisement
