Panasonic Toughbook CF-T2FWATZBM Operating Instructions Manual page 27

Panasonic toughbook cf-t2fwatzbm: user guide
Table of Contents

Advertisement

Computer Viruses
Windows Update
Wireless LAN
Users are advised to purchase the latest versions of virus protection software and use
them regularly.
We recommend you run the software:
When booting your computer.
After receiving data.
We recommend that you check data received on disks or from external sources, such as data
downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before run-
ning a check).
You can use the latest patches and service packs for Windows with the following menus.
Do not apply "Driver Updates" even if a message to update a driver appears. If a driver
update is required, contact your technical support office (
[start] - [All programs] - [Windows Update].
To prevent theft of data or unauthorized access to the hard disk via a wireless LAN.
If you plan to use wireless LAN functions, we recommend that you do so only after making
the appropriate security settings, such as for encryption.
For instructions on settings for wireless LAN and cautions during use, click [start]-
[Reference Manual], and refer to "Wireless LAN".
Before using a wireless LAN, turn the wireless LAN on using the following method (at
the time of purchase, the wireless LAN is set to [Wireless Off]).
1 Double-click
(When the wireless LAN is off) on the notification area.
2 Click ▼ and click [Wireless On].
The icon will turn to
Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN
signals may affect the operation of devices in the vicinity.
Abide by instructions regarding use in airplanes and hospitals.
Enable/disable wireless LAN standard IEEE802.11a (802.11a)
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is re-
stricted by law. Comply with the laws in the country concerned. (
1 Click the
icon (when the wireless LAN is on) or the
is off) on the notification area.
2 To disable 802.11a:
Click [Disable 802.11a].
To enable 802.11a:
Click [Enable 802.11a].
Even when 802.11a is enabled or disabled,
(yellow icon) /
(red icon) /
or
will not change.
page 45).
(green icon).
page 3)
icon (when the wireless LAN
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cf-t2 seriesCt-t2 seriesCft2fwatzbm

Table of Contents