Panasonic Dashboard - Panasonic Toughbook CF-H1ADBAZCM Reference Manual

Panasonic Dashboard

You can perform the following operations by using Panasonic Dashboard.
Check the remaining battery charge
Change the LCD brightness
Change the camera light settings
Change the screen color of Cleaning Utility
Enable or disable the touchscreen operation
Start the application software which you registered
Change the settings of cleaning reminder, RFID, touchscreen, button assignment of Panasonic Dashboard and applica-
tion buttons
1
<Healthcare model without Barcode Reader>
Press the application button [A2]
<Field model>
Press the application button to which [Panasonic Dash-
board] is assigned (A)
You can also start Panasonic Dashboard by clicking
tion area, right-clicking
Panasonic Dashboard starts up.
*1
You can change the setting of application button (
*2
To check to see or change the setting of application buttons, use the Applica-
tion Button Setting function (
2
Make the operation.
[Battery] (B)
You can check the remaining battery charge and battery operating time.
Battery operating time is for reference. The operation time may increase
and/or decrease by the state of the computer. This is not a malfunction.
[Brightness] (C)
You can change the LCD brightness. The brightness can be changed by
clicking the desired position of the bar.
The brightness for battery operation and AC power operation can be set
separately.
[Camera Light] (D)
To display the light switch while using the camera, add a check mark
for [Automatically display the light switch while using the camera].
To turn on the light when the preview starts, add a check mark for [Always turn the light ON when the preview starts].
*1
(A).
*2
.
, then clicking [Settings...].
page
page 18).
on the notifica-
18).
<Healthcare
model without
Barcode Reader>
B
C
D
F
G
H
15
A
A
<Field model>
E