Move Methods; Connect To Power - Infinity RockerTech Bliss User Manual

Move Methods

- Apply pressure to the back of the massage chair from behind to pivot on the Castors. Have a second
person up front to guide the Footrest until in the correct position. Maintain clearances as mentioned
above. Gently lower into place. Do not pull on the side arms.
- Do not move the chair when there is user inside.
- Chair is heavy. Use caution and get assistance when lifting to avoid injury. Do NOT lift chair by footrest or armrests to avoid
CAUTION
damage to product.

Connect to Power

Plug into a 110V grounded outlet.
Grounding Instructions
To avoid risk of electrical shock, turn power switch off before plugging unit into electrical outlet. Use only with properly
grounded outlet (3 prong). Do not plug into ungrounded outlet.
WARNING
WARNING
– Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product – if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug that
looks like the plug illustrated. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used
with this product.
Earthing
This massage chair is a Class 1 electrical appliance. Make sure to use a
grounded outlet to the grounded power supply circuit and a properly installed
earth grounding rod with ground connection, to avoid electric shock.
Grounding pin
11
Castors
Grounded
outlet