Page 1
Thin Warning It is important to utilize the correct screws for each corresponding ceiling and floor surface. Screws are not provided. Screws should be able to support 40 lbs of weight. ceiling mounting Tools Power Drill Wire Cutters Crimper (Not Included)
Page 2
Wire Clamp Coupler Coupler Step 1 Using a bolt and nut, attach an adjustable clamp to the Thin baffle Step 2 Before cutting wire, determine the desired length and add 2-3 Step 5 Step 6 Raise the baffle and all attached parts to the ceiling and screw the Using a drill attach the upper half of the ceiling coupler to the using the precut holes.