Hobby-Lobby LC46MTS75H2DHLL Quick Start Manual

ASSEMBLY INSTRUCTIONS

1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an "X". Align the holes for the insertion
of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave enough
room for the tree pole from section C to be inserted in the assembled tree stand.
3. Carefully insert the bottom section C of the tree into the assembled stand. Make sure the pole is firmly inserted into stand
and screws are tightened.
4. Identify the tree middle section B and place the end of pole into the tree bottom section C.
5. Identify the tree top section A and place the end of pole into tree middle section B.
6. Connect the lights between each tree section following the markings.
7. Plug the power adaptor into the wall outlet.
8. The tree should now be lit. If some bulbs do not light, search for any loose connections, broken, or missing bulbs.
9. This tree is a "Self-Shaped Tree" made with memory wire. Memory wire remembers its shape, and the branch tips
instantly spring into place. Gently pull down the needles on tree top.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
MODEL #: LC46MTS75H2DHLL – 2021 TREE LETTER "T"
SKU# 5343397
Made in Cambodia