Hobby-Lobby HG-80001-75CLED Assembly Instructions

ASSEMBLY INSTRUCTIONS
1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an "X". Align the holes for the insertion
of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave enough
room for the tree pole from section C to be inserted in the assembled tree stand.
3. Carefully insert the bottom section C of the tree into the assembled stand. Make sure the pole is firmly inserted into stand
and screws are tightened.
4. Identify the tree middle section B and place the end of pole into the tree bottom section C.
5. Identify the tree top section A and place the end of pole into tree middle section B.
6. Connect the lights between each tree section following the markings.
7. Allow branches to fall into place. When adjusting branches be sure that all wires are free of branch hinges.
8. Plug the power adaptor into the wall outlet. This tree includes a 8 functions (1. Combination 2. In waves 3. Sequential 4.
Slow-glow 5. Chasing / Flash 6. Slow Fade 7. Twinkle / Flash 8. Steady On) control box.
9. Keep tree plugged in while shaping your tree.
10. Begin to shape the branches working from the bottom to the top.
pulling them to two sides to form a "V" shape.
11. Gently pull down the needles on the tree top section A to achieve your desired tree shape.
12. Your tree is now ready to be decorated and enjoyed.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This tree includes a 8-functions (1. Combination 2. In waves 3. Sequential 4. Slow-glow
5. Chasing / Flash 6. Slow Fade 7. Twinkle / Flash 8. Steady On) control box. The whole
tree will be lit after switched on
Vendor Item No.: HG-80001-75CLED – 2021 TREE LETTER "E"
Separate the side stems from the main branch by gently
SKU# 5556162
Made in China