Hobby-Lobby KC03AMSXTS75DH2 Manual

SINGLE PLUG POWER CONNECT
POLE TO POLE ELECTRICAL CONNECTION

ASSEMBLY INSTRUCTIONS

1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an "X". Align the holes for the insertion
of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave enough room
for the tree pole from section C to be inserted in the assembled tree stand (Diagram A).
3. Identify the tree bottom section C and place the end of pole into the assembled stand. Make sure the pole is firmly inserted
into stand and screws tightened.
4. Plug the adaptor into the power supply. This tree includes a 3 functions foot pedal controller. Please step once on the foot
pedal and the lights will come on, and step twice the mini lights will turn to random twinkle.
5. Identify the tree middle section B and place the end of pole into the tree bottom section C. Allow branches to fall into place.
With the POLE TO POLE ELECTRICAL CONNECTION® technology, tree middle section B should now be lit (Diagram C).
6. Insert the tree top A into the tree middle section B. With the POLE TO POLE ELECTRICAL CONNECTION® technology, tree top
A should now be lit (Diagram B).
7. "Self-Shaped Tree" made with memory wire remembers its shape, and the branch tips instantly spring into place. Gently pull
down the needles on tree top.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This tree includes a 3-functions (ON/TWINKLE/OFF) foot pedal controller.
The whole tree will be lit after switched on
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J"
®
®
SKU# 5344239
TECHNOLOGY
Made in Cambodia