Samsung OfficeServ DS-5021D User Manual page 69

Call Retransferring
NOTE
- When you are transferring a call to a station programmed for Voice Announce or Auto
Answer, the transferred call will always ring.
- After the internal party answers, you may alternate back and forth between the parties by
pressing the [Transfer] button.
- You cannot transfer an Intercom call by pressing the [DSS] button for the station required.
You must press the [Transfer] button first and then press the [DSS] button or dial the
destination extension number.
Transfer With Camp-On
© SAMSUNG Electronics Co., Ltd.
If you wish to send the call to another extension
without waiting for the first station to hang up,
simply press another [DSS] button.
Or, press the CALL button or trunk line button to
return to the outside party and begin the transfer
process again.
When you are transferring a call to another station
and you receive a busy signal, you may camp the
call on to this station. So, when this station becomes
free, it can be connected to the transferred call.
Simply hang up when you hear a busy signal.
Then, the called party will be alerted by a call waiting
tone.
67