Transport, Storage, Decommissioning And; Disposal; Manufacturer Testing And Verification - Tiger TP Original Instruction Manual

Trolley
Table of Contents

Advertisement

5. Transport, Storage, Decommissioning and Disposal
Transporting the unit:
Do not drop or throw the unit, always deposit it carefully.
Use suitable transport means. These depend on the local conditions.
Storing or temporarily taking the unit out of service:
To ensure the continuing integrity of the unit you should store the unit in conditions that do not lead to damage or
deterioration. Therefore:
Inspect trolleys and accessories before placing into storage.
Never return damaged trolleys to storage.
The unit should be secured against unauthorised and unwarranted use.
Store the unit in a clean and dry place.
Protect the unit including all accessories against contamination, humidity and damage by means of a suitable cover.
Protect against corrosion.
Wipe off all dirt and water.
A light oil film should be applied to the adjusting
If the unit is to be used again after it has been taken out of service, it must first be inspected again by a competent
person.

Disposal

When the product comes to the end of its lifecycle, after taking the unit out of service, recycle or dispose of the parts of the
unit respecting local and national environmental regulations.

6. Manufacturer Testing and Verification

This product was manufactured under our single-unit control of quality and was passed with strict inspection in accordance
with our inspection standards.
Capacity (tonne)
WLL (kg)
0.5
500
1
1000
2
2000
3
3000
5
5000
The operating temperature range is -30°C (-22°F) to +50°C (+122 °F) unless the unit has been specifically supplied
for the range -50°C (-58°F) to +50°C (+122 °F).
Declaration of Conformity
Tiger TP/TG Trolleys have a 5:1 factor of safety. They are tested in line with the requirements within applicable sections of the
European standard EN 13157: 2004+A1:2009 and the Australian standard AS1418.2. All items comply with the essential health
and safety requirements of the Machinery Directive 2006/42/EC. Tiger trolleys are third party verified by SGS Certificate
Number MDC 1302.
Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
bar.
Test Load (kg)
Capacity (tonne)
750
1500
3000
4500
7500
Instruction Guide Tiger TP-TG En 201812 v1.1
WLL (kg)
10
10000
20
20000
25
25000
30
30000
www.tigerlifting.com
Page 7 of 14
Test Load (kg)
15000
25000
31250
37500

Advertisement

Table of Contents
loading

Table of Contents