Xingyun XY-C Instruction Book

of counting mode, "5,10,20, 40, 50, 100, 200, 300, 400, 500" Press "TARE" and choose
one mode value. Place the things with same quantity with mode value on the weighing tray
and then press "confirm" button". Then "= = = = = =" will be displayed. Very soonly, it will
display stable mode value and then the setting of counting
After that, counting operation could be conducted. Place the
things in the weighing tray and display will show the quantity
of thing.
Counting operation requires the weight of weighed thing must heavier than the four
times of minimum reading value or the difference of counting could be great if not
counting can't be done.
(2) Quit the counting operation:
Press the "COU" button and then "= = = = = =" will be displayed. The scale may quit
counting operation state immediately and return the weighing state.
(3) Overload warning
When weighing thing is over the maximum weighing value of the scale, the display
will show "- - - - - -" and indicate the thing is overloaded. The weighing thing shall be
removed to avoid damaging the scale.
Ⅸ Cautions
(1) Switch on power resource according to requirements to make scale warm up before
usage.
(2) Working environment and conditions shall conform to the environment requirements.
(3) The weight of all weighing things on the weighing tray can't exceed the required
weighing range.
(4) When weighing is not accurate, calibration shall be undertaken by use of standard
weight according to concerning requirements.
(5) If user found any defection in the scale, don't try to disassemble the machine shell and
repair it to avoid damaging the precision parts in the machine. Please take it to the
distributor or send it to the manufacturer and let them repair.
Ⅹ Package list
Electronic scale 1 set Instruction book
Weighing tray 1 Electrical adapter
Ⅺ The parts to choose and buy
Standard weight
operation is finished.
1 copy
1
ELECTRONIC BALANCE
INSTRUCTION BOOK